Numbers and Titles



40 05 00 Common Work Results for Process Interconnections
Print this page
IncludesCommon work results for process equipment. Equipment and devices for piping systems, and for regulating and controlling the flow of liquids and gases in conduits, including pipe, valves, and appurtenances. Hydraulic gates and appurtenances for controlling open-channel flow at a facility.
Alternate Terms/AbbreviationsAnti-cavitation valve: Energy-dissipating valve. Cast iron slide gates: cast iron sluice gates. ABS: Acrylonitrile butadiene styrene. AWWA: American Water Works Association. CCFRPM: Centrifugally cast fiberglass reinforced polymer mortar. CPVC: Chlorinated polyvinyl chloride. FRP: Fiberglass-reinforced plastic. HDPE: High-density Polyethylene. PTFE: Polytetrafluoroethylene. PVC: Polyvinyl chloride. PVDF: Polyvinylidene fluoride.
NotesThe term "process" used herein includes potable water and other process applications. Work results designated as "water" are typically covered under the standards of the American Water Works Association (AWWA).
See21 00 00 for piping associated with fire suppression systems. 22 00 00 for piping associated with plumbing systems. 23 00 00 for piping associated with HVAC systems. 32 80 00 for irrigation. 33 00 00 for utility piping. 35 22 00 for hydraulic gates 40 05 59 for instrumentation and controls related to valves and hydraulic gates. 40 10 00 for process piping systems. 40 91 00 for primary process control valves for instrumentation/control-related systems.
40 05 04Selective Demolition for Process Interconnections
40 05 05Exposed Piping Installation
40 05 06Couplings, Adapters, and Specials for Process Piping
40 05 07Hangers and Supports for Process Piping
40 05 09Wall Pipes, Floor Pipes, and Pipe Sleeves
40 05 11Aluminum Process Pipe
40 05 12Brass Process Pipe
40 05 13Bronze Process Pipe
40 05 17Copper Process Pipe and Tubing
40 05 19Ductile Iron Process Pipe
40 05 21High-Alloy Nickel Process Pipe and Tubing
40 05 23Stainless Steel Process Pipe and Tubing
40 05 24Steel Process Pipe
40 05 26Other Metals Process Pipe
40 05 31Thermoplastic Process Pipe
40 05 33High-Density Polyethylene Process Pipe
40 05 36Fiberglass-Reinforced Plastic Process Pipe
40 05 37Centrifugally Cast Fiberglass-Reinforced Polymer Mortar Process Pipe
40 05 38PTFE Process Pipe
40 05 39Concrete Pipe
40 05 51Common Requirements for Process Valves
40 05 53Process Valves Four-inch Diameter and Larger
40 05 56Process Valves, Smaller than Four-inch Diameter
40 05 57Actuators for Process Valves and Gates
40 05 59Hydraulic Gates
40 05 61Gate Valves
40 05 62Plug Valves
40 05 63Ball Valves
40 05 64Butterfly Valves
40 05 65Valves for Pump Control and Check Service
40 05 67Specialized Pressure and Flow-Control Valves
40 05 71Solids Handling Valves
40 05 73Special-Application Process Valves
40 05 74Flexible-Closure Valves
40 05 76Hot-Tapping Valves and Appurtenances
40 05 78Air Valves for Water and Wastewater Service
40 05 81Hydrants and Hose Bibbs for Process Service
40 05 82Solenoid Valves for Process Service
40 05 89Valve Accessories
40 05 93Common Motor Requirements for Process Equipment
40 05 96Vibration and Seismic Controls for Process Equipment
40 05 97Identification for Process Equipment